Quality & Inspections
Quality assurance, testing, inspection records and non-conformance reporting
Air Tightness Test Record
A record of building air permeability testing required under Part L of the Building Regulations.
Building Regs Part L / SAP
As-Built Drawing Register
A register of as-built drawings showing the final installed condition of all works.
CDM 2015 / Contract
BIM Execution Plan (BEP)
The BIM Execution Plan defines how Building Information Modelling will be delivered on a specific project. It covers roles and responsibilities, information standards, the Common Data Environment, software and formats, level of information need, spatial coordination procedures, and handover of the Asset Information Model. Required by the Employer's Information Requirements on all BIM-enabled projects and mandatory on UK Government centrally-procured projects.
ISO 19650 / PAS 1192 / Government Mandate
Compaction and Density Test Record
A record of compaction and density testing for fill materials, sub-bases, and road layers.
BS Standards
Concrete Test Record
A record of concrete testing including slump tests and cube samples taken during pours.
BS EN 206
Drawing Issue Register
A register tracking all drawing issues, revisions, and superseded versions on a project.
Contract / BIM Protocol
Electrical Test Certificate EICR
An Electrical Installation Condition Report certifying that the electrical installation meets BS 7671.
BS 7671 / Building Regs Part P
Gas Commissioning Certificate
A certificate issued by a Gas Safe registered engineer confirming that gas installations have been commissioned safely.
Gas Safety Regs 1998
Pressure Test Record
A record of pressure testing on pipework systems including heating, gas, and water installations.
BS EN 806 / Gas Safety Regs
Snagging List and Defects Register
A register of defects and incomplete works identified during pre-completion inspections.
Contract / JCT
Water and Hydraulic Pressure Test
A record of hydraulic pressure testing on water supply and drainage pipework.
BS EN 805 / WRAS
Weld Inspection Record
A record of weld inspections including visual inspection, NDT results, and welder qualifications.
BS EN ISO 3834
Corrective Action Report
A report documenting corrective actions taken in response to non-conformances or audit findings.
Contract / ISO 9001
Hold Point and Witness Point Register
A register tracking hold points and witness points in the construction process.
Contract / ITP
Inspection and Test Plan
A plan defining the inspection, testing, and verification activities required at each stage of construction.
Contract / BS Standards
Material Approval Request
A request for approval of materials or products before they are ordered or installed.
Contract / Specification
Material Delivery Inspection Record
A record of material inspections carried out on delivery to site.
Contract / Specification
Non-Conformance Report
A report documenting work that does not conform to the specification, drawings, or approved standards.
Contract / ISO 9001
Specification Compliance Checklist
A checklist verifying that installed works comply with the project specification and building regulations.
Contract / Building Regs
Other Categories
CDM 2015 Core
13 documents
Risk Assessments
27 documents
COSHH
15 documents
Asbestos
8 documents
Permits to Work
14 documents
Site Management
26 documents
Incidents & Accidents
10 documents
Toolbox Talks
22 documents
Subcontractors
19 documents
Building Safety Act
12 documents
Handover & Completion
15 documents
Environmental
17 documents
Commercial & Contract
24 documents
HR & Workforce
12 documents
Fire Safety
14 documents
Occupational Health
8 documents
Site Policy & Management
5 documents
Completions & Planning
5 documents
Statutory Inspections
20 documents